Grade 600-3 SG Iron - EN-GJS-600-3
Grade 600-3 SG iron supplied in bars up to 3m in length, stock can be cut to length as required. The final number in the SG iron grade (EN-GJS-600-3) refers to the minimum percentage elongation. Our EN-GJS-600-3 SG iron (ductile iron) is supplied conforming to BS EN 1563 and can be delivered throughout the UK.
EN-GJS-600-3 is an SG iron grade containing graphite nodules or spheres, Spheroidal Graphite. The rounded graphite nodules produces a more ductile cast iron that inhibits the formation of cracks. SG iron such as EN-GJS-600-3 has a greater fatigue and impact resistance compared to grey iron.
Ductile iron offers several advantages over castings in mild steel, it offers very good machinability and a superior surface finish. Ductile iron is less brittle than grey iron and offers compressive strength comparable to many mild steels, it also offers a weight advantage as it is approximately 10% lighter than steel.
EN-GJS-600-3 SG iron supplied conforming to BS EN 1563 (2011), equivalent to ISO 1083 (2004)
|Material Grade (BS EN 1563)||BS 2789 grade||Elongation min %||Tensile strength N/mm2||Hardness HB|
EN-GJS-600-3 is also know as grade Grade 600-3 (BS 2789), GGG60 (DIN 1693) and internationally 600-3 (ISO 1083)
|EN-GJS-600-3 SG iron rounds:|
|25mm diameter to 450mm diameter|
|Standard bar lengths are 3 metres.|
Steel Express can supply a full range of grey iron and SG iron bar. If you need assistance in finding the right grade of cast iron, please call our team who are always on hand to help.