Steel Suppliers and stockholders - Steel Express

HomeEngineering SteelNon-Ferrous SteelTool SteelStructural SteelServicesFabricationAboutContact

EN24T Steel Properties

EN24T / 817m40. EN24 is usually supplied in the T condition with a tensile strength of 850/1000 N/mm2.

EN24T steel is a popular grade of through-hardening alloy steel due to its excellent machinability in the "T" condition. EN24T is used in components such as gears, shafts, studs and bolts, its hardness is in the range 248/302 HB. EN24T can be further surface-hardened to create components with enhanced wear resistance by induction or nitriding processing.

Click for EN24T stock

International Steel Specification Comparison (EN24T)

BS 970:1955 EN24T
BS 970:1991 817M40T
German / DIN 34CrNiMo6
French AFNOR 35NCD6
American AISI / SAE 4340
German Werkstoff No. 1.6582
European Standard EN10277-5

 

817M40T - EN24T steel is a high tensile alloy steel renown for its wear resistance properties and also where high strength properties are required. EN24T is used in components subject to high stress and with a large cross section. This can include aircraft, automotive and general engineering applications for example propeller or gear shafts, connecting rods, aircraft landing gear components.

Typical chemical composition of En24T

C

SI

MN

S

P

Cr

Mo

Ni

0.36/0.44

0.10/0.35

0.45/0.70

0.040 max

0.035 max

1.00/1.40

0.20/0.35

1.30/1.70

817M40T / EN24T Steel Mechanical Properties

Size
mm

Tensile
Strength
N/mm²

Yield
Stress
N/mm²

Elongation

Impact
Izod J

Impact
KCV J

Hardness
HB

63 to 150

850-1000

680 Min

13%

54

50

248/302

150 to 250

850-1000

654 Min

13%

40

35

248/302

Convert hardness to Rockwell B, Rockwell C or Vickers.

 

Hardening EN24: Heat uniformly to 823/850°C until heated through. Quench in oil.

Tempering:  Heat uniformly and thoroughly at the selected tempering temperature, up to 660°C and hold at heat for two hours per inch of  total thickness.
Tempering between 250-375°C in not recommended as this can seriously reduce the steels impact value.

Stress Relieving: Heat slowly to 650-670°C, soak well. Cool the EN24 tool in a furnace or in air.

EN24T steel is available from stock in round and flat bar and in plate.

Click here for Steel hardness conversion charts and heat treatment hardness tables

Steel Weight Calculator >>

Other engineering steel grades: En1A, En3B, En8, En9, En14, En16, En19, En24, EN24T, En36

Site Search »

Toolsteels, Highspeed Steels & Mould Steels »

Engineering Steels »

Structural Steels, mild steel
S275, S355, ST52 »

Non Ferrous
Stainless Steel, Aluminium »

Weld Mesh & Perforated Sheet
Steel, aluminium, brass »

Steel Sections »

Fabrication »

Free Issue Cutting »

Forgings »

Steel Hardness conversions »

Steel Weight Calculator »

 

Tool Steel

01

A2

D2

D2 Supreme™

D3

H13

M42

M2

P20

Engineering Steel

EN1A

EN1A LD

EN3B

EN8

EN9

EN14

EN16

EN19

EN24/EN24T

EN36

Alloy24™

Structural Steel

Angles

RHS

CHS

Seamless Tubes

ERW

Flats

Squares

Sheets

Universal Beams

Universal Columns

Channels

T sections

Rounds

Stainless Steel

303

304

316

410

17-4PH

Stainless Steel Sheet

Stainless Steel Bar

Stainless Steel Tube

Steel Express

Based in Wolverhampton, West Midlands, Steel Express are steel suppliers and stockholders. Stock is delivered on our own fleet of vehicles locally and nationally quickly and efficiently on the day we say we will.

We also provide a free issue cutting service, press braking, fabrication and forging.

Google+ Follow us on Twitter

 



Copyright © 2009-2014 Steel Express - Steel Stockholders and suppliers | Terms | Privacy | Website design The Ideas Forge