H11 TOOL STEEL ECONOMIZER
Pre-machined H11 tool steel with machining allowance. Both bar ends saw cut.
H11 (1.2343) is a 5% chromium hot work tool steel. Compare to H13, H11 has less vanadium giving it higher toughness, with some reduction in wear resistance and temper resistance. H11 has excellent dimensional stability during heat treatment. See our tool steel application chart
Typical chemical composition of H11 Tool steel (1.2343) |
|||||||
|---|---|---|---|---|---|---|---|
| C | Mn | P | S | Si | Cr | V | Mo |
| 0.25-0.45% | 0.20-0.60% | 0.03% | 0.03% | 0.80-1.25% | 4.75-5.50% | 0.30-0.60% | 1.10-1.60% |
Tolerances
Thickness: -0.00/+0.20 mm
Width: -0.00/+0.40 mm
Square: +0.40/+0.40 mm
Length: +5.00/+30.00 mm
- Thickness and width of material in ground/fine milled execution
- Both bar ends saw cut
- Surface roughness max. 3.2 µm
- Rust protected, wrapped in VCI-paper
H11 Economizer - Pre-machined - Sold in 500 mm or 1000 mm lengths
| Thickness: | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4.2 | 5.2 | 6.2 | 8.2 | 10.4 | 12.4 | 15.4 | 16.4 | 20.4 | 22.4 | 25.4 | 30.4 | ||
| Width: | 10.4 | X | X | X | X | X | |||||||
| 12.4 | X | X | X | X | X | X | |||||||
| 15.4 | X | X | X | X | X | X | X | ||||||
| 16.4 | X | X | X | X | X | X | X | ||||||
| 20.4 | X | X | X | X | X | X | X | X | X | ||||
| 25.4 | X | X | X | X | X | X | X | X | X | X | |||
| 30.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 32.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 40.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 50.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 60.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 63.4 | |||||||||||||
| 70.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 80.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 90.4 | X | X | X | X | X | X | X | ||||||
| 100.4 | X | X | X | X | X | X | X | X | X | X | X | X | |
| 110.4 | X | X | X | ||||||||||
| 120.4 | X | X | X | X | X | X | X | ||||||
| 130.4 | X | X | X | X | X | ||||||||
| 140.4 | X | X | X | X | X | X | |||||||
| 150.4 | X | X | X | X | X | X | X | X | X | X | |||
| 160.4 | X | X | X | X | X | X | X | X | |||||
| 180.4 | X | X | X | X | |||||||||
| 200.4 | X | X | X | X | X | X | X | X | X | X | |||
| 250.4 | X | X | X | X | X | X | X | X | X | ||||
| 300.4 | X | X | X | X | X | X | X | X | |||||
| 350.4 | X | X | X | ||||||||||
| 405 | X | X | X | X | X | X | X | ||||||
| 505 | X | X | X | X | X | X | X | X | X | ||||
| Width | 32.4 | 40.4 | 50.4 | 60.4 | 63.4 | 70.4 | 80.4 | 90.4 | 100.4 | 120.4 | 150.4 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10.4 | ||||||||||||
| 12.4 | ||||||||||||
| 15.4 | ||||||||||||
| 16.4 | ||||||||||||
| 20.4 | ||||||||||||
| 25.4 | ||||||||||||
| 30.4 | ||||||||||||
| 32.4 | X | |||||||||||
| 40.4 | X | X | ||||||||||
| 50.4 | X | X | X | |||||||||
| 60.4 | X | X | X | X | ||||||||
| 63.4 | X | |||||||||||
| 70.4 | X | X | X | X | X | |||||||
| 80.4 | X | X | X | X | X | X | ||||||
| 90.4 | X | X | X | X | X | X | X | |||||
| 100.4 | X | X | X | X | X | X | X | X | ||||
| 110.4 | X | X | X | X | ||||||||
| 120.4 | X | X | X | X | X | X | X | X | ||||
| 130.4 | X | X | X | X | ||||||||
| 140.4 | X | X | X | X | X | X | ||||||
| 150.4 | X | X | X | X | X | X | X | X | X | X | ||
| 160.4 | X | X | X | X | ||||||||
| 180.4 | X | X | X | X | X | X | ||||||
| 200.4 | X | X | X | X | X | X | X | X | X | |||
| 250.4 | X | X | X | X | ||||||||
| 300.4 | X | X | X | X | ||||||||
| 350.4 | X | X | ||||||||||
| 405 | X | X | X | X | X | |||||||
| 505 | X | X | X | X |
Call 01902 716333 for nationwide tool steel delivery.
Steel Express - Tool steel suppliers and stockholders delivering throughout the West midlands and nationwide. Stock cut to size as required. Call now to place your order for rapid delivery.
See Also H13 tool steel and 01 Tool steel.
Tool Steel
Useful tools
