P20S TOOL STEEL ECONOMIZER

Pre-machined, P20S tool steel with machining allowance. Both bar ends saw cut.

P20S (1.2312) Delivered pre-hardened this material is ready for use at approximately 280/325 H.B. Similar to P20 (1.2311) but with a higher sulpher content which provides much improved machinability. This grade is not suitable for polishing or other applications requiring a fine finish.

Tolerances

Thickness: -0.00/+0.20 mm
Width: -0.00/+0.40 mm
Square: +0.40/+0.40 mm
Length: +5.00/+30.00 mm

• Thickness and width of material in ground/fine milled execution
• Both bar ends saw cut
• Surface roughness max. 3.2 µm
• Rust protected, wrapped in VCI-paper

Call 01902 716333 for nationwide tool steel delivery.